12/17/2004
0:21		sent get_spi.stol		TG
		>> we received spi, spi2 and spi3.
0:48		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
1:30		SCI_SW_OPMODE 0		TG
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
1:49		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
2:00		ESC send us play-back data (from 20041216-193036c.spi3   , GMT)
2:08		SCI_SW_OPMODE 0		TG
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
2:35		playback data receaving done, waiting for another playback data
2:40		Second play-back data does not come well
		>>WARNING: Ipacketlist : pl0 :discarded packet.
		But, after 3mins, it looks ok
		>> 200 events
4:04		SCI_SW_OPMODE 0		TG
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		Plak-back finished at some point.
4:50		ESC start sending other play-back data(from 22:00 to 22:20 GMT)
4:53		It's done without any files. I guess, it has only displaying data and housekeeping.
5:30		SCI_SW_OPMODE 0		TG
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
6:50		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
7:08		Run New Sparcification for SCD throuth all chennels(YS/OP)		KC
7:22		Send "get_spi.stol" to get spi1,2, and 3 by YS/OP		KC
7:27		ESC told us that receiving and commanding are not available		KC
		until 8:15 due to switching TDRSS to IRIDIUM.
8:19		resumed receiving data		KC
8:20		Standby mode		KC
8:23		receiving playback (data from12:22 to13:20 )		KC
8:37		SCI_SW_OPMODE 0		KC
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
9:00		Sent all data and hsk files to Simon by scp		KC
9:15		data disconnected and connected right away		KC
9:37		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
9:40		Opher sent command 'get_spi.stol'		KC
		command sent for SCD - 26 chennels sparcification to be updated
		because the 26 chennels running with low sparcification and the
		data are too much noisy.
		'scd_spars_update.stol' sent by OP
11:43		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
11:59		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
12:09		Opher sent commands		JH
		SCI_ENABLE_AUSTV 2296, 2, 20
		SCI_ENABLE_AUSTV 2296, 0, 3
		SCI_ENABLE_AUSTV 2296, 1, 1
		and he changed scd_spars_update.stol
		one channel number changed from 2298 to 2296
13:43		sent 3 commands, but failed sending script daq_restart.stol		JH
		SCI_SW_OPMODE 0
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		closed CDAQ_CREAM,  killed cdaq_cli and restarted. It's okay^^
		miscommunicated with ESC, they disconnected data flow for a while
14:10		Respond Sony's email to get the pmf000.tgz file, uncompress this file		HQ
		to get pmf000.000-pmf000.007 total 8 files, then ask ESC to copy and
		uopload these 8 files
14:23		Sonny sent email to YS for uploading pmf000.000-007 ugently		KC
		We(JH, HQ and KC) copied the files from email attached files.
		We asked ESC to copy and upload the files,
		However, commanding window is not enough to uploading.
		ESC told us that they will upload at the next window time.
		It will be from 3:45:30pm(EST)
15:59		The window time is still not enouth to upload.		KC
		ESC finished only 2 files out of 8
		We, SOC, are just waiting ESC to finish uploading the files.
16:23		SCI_SW_OPMODE 0		KC
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		ESC finished 3 files out of 8 and keep doing upload ….
16:50		ESC finished uploading		KC
		We sent the following commands to verify the results
		SCI_SW_LOGFILE_SEND
		We see a sys file and all frag from 0 to 7(20041217-214052.sys)
		SCI_SW_NOOP
		SCI_SW_CUSTOM
		We got the 2nd sys file (20041217-214243.sys)
		The file starts with
		*** CUSTOM Fri Dec 17 21:42:43 GMT 2004 ***
		However, there are no contents after that
		In the Sonny's email we should see the 1,000 lines after the
		above first line, but we don't.
		We need to talk Sonny about that.(I sent an email to sonny with the result)
17:20		Nahee and Pier Simone called Opher.		KC
		They requested the 'undo SCD sparcification'
		and JH will send commands for that at the next window
18:14		ESC said the satellites are being switched.		KC		<<<	Playback is done
		The connection is closed and we are loosing data now.				<<<	at 19:50
		ESC will let us know for the next available time.				<<<
18:24		Housekeeping start updating		YS		<<<
18:50		Sent the script "scd_ch_coher.stol" by JH		KC
18:52		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
19:00		After automated Led-Run and Zcal-run, it became receiving pds files again...		YS
		SCI_SW_OPMODE 0
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
19:02		Run New Sparcification for CAL and HDS throuth all channels		JH
19;48		SCI_SW_OPMODE 0		GR
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
19:50		ESC told that they are going to send Play-back of disconnected time (18:14-18:25, today). However, it does not look coming..		YS
		I asked them to re-send them..
20:07		Pds files are coming again…  PKT0 goes up to 5%		YS
		SCI_SW_OPMODE 0
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
20:13		NET:19kbps, overall 21Hz, CAL: 0Hz		JH
20:15		sent cal_trig_threshold95.stol to change cal trigger threshold from 100 to 95
20:16		SCI_SW_OPMODE 0		JH
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		CAL trigger rate: 0.2Hz
20:20		sent cal_trig_threshold90.stol		JH
		CAL trigger rate: 0.4Hz
		from 20041218-011759.dat file cal_trig_threshold is changed
		CAL trigger rate: 0.2Hz, NETwork rate: 20kbps
20:24		sent cal_trig_threshold80.stol		JH
20:36		sent cal_trig_threshold.stol		JH
		CAL trigger rate:0.2Hz, NETwork rate:18kbps
20:38		sent cal_trig_threshold50.stol		JH
		PKT0 goes up over 50%, finally 100%
20:41		sent cal_trig_threshold80.stol		JH
20:43		SCI_SW_OPMODE 0		JH
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		sent cal_trig_threshold95.stol
21:17		SCI_SW_NOOP		YS
		SCI_SNIO_CONTROL 21,0
		After these commands, all the Warning message in GUI log are stopped
		And, then, it started processing commands we sent 20 minutes ago.
		Finally, it came back to original status.
		Overall trigger rate:21hz (ZHI:21Hz and CAL 0Hz)
		And, spi3 and dat files are coming..
21:28		sent cal_trig_threshold95.stol		YS
		>>check log file all commands gone through.
21:33		20041218-023133.dat		YS
		This data file will be trigger threshold with 95.
21:37		sent cal_trig_threshold85.stol		YS
		20041218-023638.dat taken while thresholds switching to 85		OG
		20041218-024140.dat being taken with thresthold 85.
		sent cal_trig_threshold75.stol
21:49		20041218-024643.dat are in the transition to threshold with 75		YS
		CAL trigger rate is between 3-12. ave(8-9)
		20041218-025143.dat is taken with threshold 75
		PKT0 goes up slowly.
		PKT0 is abot 1%
21:59		sent cal_trig_threshold80.stol		YS
22:04		Pds files are coming again…		YS
		SCI_SW_OPMODE 0
		SCI_SNIO_CONTROL 21,0
		Execute script daq_restart.stol
		20041218-030411.dat is taken with threshold of 80
		CAL trigger rate is now 0.2-0.4 Hz.
		Opher sent CAL trigger rate threshold of 77.
		20041218-030714.dat is in the transition of threshold 77.
		CAL trigger rate is between 0.3- 2Hz
		20041218-031217.dat is taken with threshold of 77.